 |
Aviation Accessories
|
The Carmanah airport A601 mounting plate is designed for elevated edge lighting for stake mounted or floor flange installations on concrete and dirt surfaces. Applications include: taxiway edge lighting, apron edge lighting, helipad edge lighting and obstruction lighting. Manufactured to provide FAA maximum height requirements of 14”, the Carmanah A601 mounting plate will adapt to 1.5" and 2" to 1" frangible couplings with set screws for secure fit. The mounting plate is manufactured out of aluminum with powder-coated aviation yellow for daytime visual guidance. The Carmanah 1.5" or 2" Floor Flange is recommended for permanent or temporary installations using the A601 Mounting Plate.
|
|
| Related Products: A601 |
|
The 1.5" frangible coupling is compatible with the Carmanah A600 & A700 Aviation lights for stake mount and floor flange installations at civilian and defense airfields. Easily adapted to concrete and dirt mounted surfaces, the set-screw will allow for quick adjustment in the event of jet blast or collision.
|
|
| Related Products: A601 |
| 50145 | 2" to 1" Frangible Coupling |
|
The 2" to 1" frangible coupling includes a 1" column with additional set screw for secure installation using Carmanah aviation accessories. The 2" to 1" frangible coupling adapts to the 1.5" Carmanah Floor Flange, the 2" Carmanah Floor Flange, the 601 airport mounting plate and conventional 2" threaded NPT stakes. The 2" to 1" frangible coupling is manufactured out of aluminum, providing FAA compliance for high and medium intensity edge light requirements.
The 2" NPT Frangible Coupling will provide a permanent, temporary or expedited mounting system for Carmanah aviation lights.
|
|
| Related Products: A601, A702, A702-5, A702-IR, A704-5 |
|
The 2.0" floor flange is designed for concrete installations using the 2" to 1" frangible coupling for taxiway, runway, threshold, apron, or helipad edge installations. The 2.0" floor flange is excellent for permanent installations where current infrastructure is not in place and edge lights need to be secured and frangible.
|
|
| Related Products: A601, A702, A702-5, A702-IR, A704-5 |
|
The Carmanah 1.5" floor flange is designed for concrete installations using the 1.5" frangible coupling for taxiway, runway, threshold, apron, or helipad edge installations. The 1.5" floor flange is excellent for permanent installations where current infrastructure is not in place and edge lights need to be secured and frangible.
|
|
| Related Products: A601 |
| AW1601 | A601 Stake Mounting System |
|
The A601 Stake Mounting System is a complete mounting system for Model A601 solar-powered LED airfield lights that are installed in gravel or earth locations. The system includes a 14-inch (35cm) mounting stake that can be hammered into the ground, a frangible grooved column that can be replaced separately if broken on impact (as designed) and a mounting base pre-drilled to accommodate the A601 light. The system comes optionally, with a 10-inch (25cm) diameter grass guard disk that keeps grass and weeds from growing around the mounting stake (Part # AW1601GG).
|
|
| Related Products: A601 |
|
The Stake Tapper is a recommended accessory for the installation of the A601 Stake Mounting Kit. Made from stainless steel, the unit is placed inside the circular mount at the top of the mounting stake. The Stake Tapper is designed to take the force of a hammer or mallet when installing the A601 stake mounting stake into a dirt, sand or gravel environment. The tapper protects the circular mounting hole for the frangible grooved column so it is not deformed during installation.
|
|
| Related Products: A601 |
|
The A601 Fence Mounting Kit is designed for installing A601 aviation lights on standard chain link fences with a circular top bar along the top of the chain link fence. The kit features two U-bolts, a mounting plate, and all the required hardware to securely affix A601 lights to most fences.
|
|
| Related Products: A601 |
| 37002 | Airport Mounting Stake (1.5" Hub) |
|
Manufactured out of galvanized steel, the all weather airport mounting stake allows for permanent installation in earth and gravel environments at general aviation airports and remote defense airfields. The 30" airport mounting stake is available in 2" and 1.5" coupling configurations. Frangible coupling size must be determined before ordering.
Stake (Angle Iron) Mounting Instructions: Install the stake in a 6" (15 cm) diameter hole at a depth of 30" (76 cm). Do not install stake by driving it into the ground. Backfill around the stake with thoroughly compacted earth passing a 1" (2.54 cm) sieve. Where required due to unstable soil conditions, backfill with concrete. Install the top of the stake even with, or not more than 1/2" (1.3 cm), above the finished grade and maintain within 1 degree of the vertical. In areas where frost may cause heaving, anchor the stake with concrete and use a permeable backfill material such as sand and then cover the top surface with an impervious material to reduce moisture penetration.
|
|
| Related Products: A601, A702, A702-5, A702-IR, A704-5 |
| 38964 | Airport Mounting Stake (2" Hub) |
|
Manufactured out of galvanized steel, the all weather airport mounting stake allows for permanent installation in earth and gravel environments at general aviation airports and remote defense airfields. The 30" airport mounting stake is available in 2" and 1.5" coupling configurations. Frangible coupling size must be determined before ordering.
Stake (Angle Iron) Mounting Instructions: Install the stake in a 6" (15 cm) diameter hole at a depth of 30" (76 cm). Do not install stake by driving it into the ground. Backfill around the stake with thoroughly compacted earth passing a 1" (2.54 cm) sieve. Where required due to unstable soil conditions, backfill with concrete. Install the top of the stake even with, or not more than 1/2" (1.3 cm), above the finished grade and maintain within 1 degree of the vertical. In areas where frost may cause heaving, anchor the stake with concrete and use a permeable backfill material such as sand and then cover the top surface with an impervious material to reduce moisture penetration.
|
|
| Related Products: A601, A702, A702-5, A702-IR, A704-5 |
|
Optional infrared programmer. Functions available through the programmer include:
Flash code settings
Intensity and autonomy adjustments
LUX Level adjustments for the photoelectric switch that automatically turns the on/off at dusk/dawn
Activation / deactivation ability for storage or transport
A battery voltage check to determine the relative health of the battery system
About the infrared programmer
The programmer employed by Carmanah to control its Model A601 and A702 aviation lights is a standard infrared unit, identical to those used to operate televisions, VCR's, stereos, etc. Why use a standard infrared programmer? There are many reasons behind this decision:
Infrared technology requires minimal additional power to work effectively -- an important quality for our solar-powered, self-contained products.
The programmer is simple to use and people are typically familiar with its operation.
The programmer is extremely cost-effective. These programmers are mass-produced and the cost is very low relative to the cost of supplying a programmer custom manufactured by Carmanah.
Operating the infrared programmer
A video tutorial on the use of the Carmanah infrared programming is available here.
|
|
| Related Products: A601, A702, A702-IR |
| 38335 | Security Mounting Bolt Kit |
|
Combat vandalism and theft by using our stainless steel security bolt system. Once secured using our tamper-resistant, ultra-hard Chromium-Vanadium security fasteners, lights are extremely difficult to remove. Each security bolt system requires a unique, perfectly cut key to operate.
Each kit contains two security bolts and two security nuts. The driver and key for the secure nut and bolt are purchased separately.
|
|
| Related Products: A601 |
| 38334 | 601 Standard Bolt Kit |
The 601 Bolt Kit contains the required hardware to mount 601 lights to the 601 mounting plate. Each package contains the necessary items to properly mount one light. Parts list includes:
- Nut, lock, ¼"-20, SS (3)
- Washer, flat, 1/4", SS (9)
- 1/4"-20 x 1 1/2", hex cap screw, SS (3)
|
|
| Related Products: A601 |
|
The Carmanah bird deterrent accessory attaches easily to any Model 601 or 700 Series light. The spikes on the deterrent discourage birds from perching on the light.
|
|
| Related Products: A601, A702, A702-5, A702-IR, A704-5 |
| 36339 | 700 Series Mounting Plate |
|
The Carmanah airport 700 Series mounting plate is designed for elevated runway, threshold and runway caution edge lighting. The 700 Series mounting plate is designed for stake mounted or floor flange installations on concrete and/or dirt surfaces. Manufactured to fit 1.5" or 2" to 1" frangible couplings, the 700 Series mounting plate is designed to bolt into the bottom of the 700 series aviation light using stainless steel bolts. Powder coated aviation yellow, the 700 Series mounting plate adapts to the 1.5" Carmanah Floor Flange using a 1.5" frangible coupling or the 2" Carmanah Floor Flange using a 2" to 1" frangible coupling. Common size of the airports coupling will determine which floor flange is ordered.
|
|
| Related Products: A702, A702-5, A702-IR, A704-5 |
| 38339 | 700 Series Mounting Bolt Kit |
|
The 700 Series Bolt Kit contains the required hardware to mount 700 series lights to the correct mounting bases. Each package contains the necessary items to properly mount one light. Parts list includes:
Flat washer, ½", SS (8)
Screw, cap, hex, ½"-13, SS (4)
Nut, lock, ½"-13, SS (4)
|
|
| Related Products: A702-5, A702-IR, A704-5 |
| 46397 | Wedge Anchor Bolt Kit |
|
The Carmanah airport wedge anchor bolt is designed for securing the 1.5" or 2" Floor Flange to hardened concrete and dirt surfaces. Four 3/8" X 3 ¾" wedge anchor bolts are used in installations on permanent, temporary and expedited airfields.
Combined with the 1.5" or 2" Floor Flange, these wedge anchor bolts are ideal for permanent installations where current infrastructure is not in place and edge lights need to be secured and frangible.
|
|
| Related Products: A702-5, A702-IR, A704-5 |
|
The A702 IR Shield is used for Defense "box and one" operations providing unidirectional 180 degree infrared or visible output.
The unit can be installed by the end user or during manufacturing offering versatile performance in the rare chance that omnidirectional output may be needed at a later date.
|
|
| Related Products: A702-5, A702-IR |
|
Carmanah's new centralized, handheld wireless control unit, including antenna, is a secure 900 MHz radio transceiver. With a control range of up to 2.5 miles and utilizing a secure RF signal, the wireless controller reliably communicates and controls any number of Carmanah’s A704-5 solar-powered LED airfield lights from the ground, control tower or air.
Compact, lightweight and durable, Carmanah's Handheld Wireless Controller is designed to withstand extreme temperatures and meets the environmental requirements of MIL-SPEC-810.
|
|
| Related Products: A704-5 |
|
