 |
A702-5 Runway/Threshold/Obstruction/Helipad/Taxiway
Ideal for areas where a high output light is required, the Model A702-5 runway light has all the features of the Model A702 light, but adds a top-mounted solar panel for significantly increased performance. The A702-5 operates automatically from dusk to dawn, although it can also run throughout the day during adverse weather or other low-visibility conditions. Designed for use at remote airfield landing strips and expedited airfields, the 700-series lights are ideal for temporary or permanent runway-edge lighting, obstruction lighting and helipad lighting tasks.
Split-lens versions are available for red/green (threshold), amber/white (caution), and red/white lighting applications.
For more product information or to place an order, contact Carmanah.
| Applications |
Benefits |
Features |
Specifications |
Accessories |
|
 |
Applications
- Runway edge lighting
- Threshold lighting (split lens Amber/White)
- Obstruction lighting
- Runway caution lighting (split lens Red/Green)
- Helipad lighting
- Telecommunication towers
Benefits
- Quick installation. This unit is easily mounted to standard frangible coupling.
- Minimal capital cost.
- Pays for itself within the first year of operation in the form of reduced installation, maintenance and servicing costs.
- Reliable operation 365 days per year.
- Operates at nearly any location on earth and will charge under nearly all weather conditions.
- Extremely rugged, waterproof and vandal resistant.
Features
- Up to 18cd output available. Steady on 24cd emergency mode, daytime operation.
- Push button mechanical control - four possible intensity settings.
- Up to 100 hours of no-sun operating capacity from a full charge
- Available in red, green, amber, white and blue.
- Uses Carmanah's proprietary MicroSource™ Energy Management System for reliable operation.
- Completely integrated, self-contained, waterproof and compact.
- Rugged-grade aluminum housing, polymer encapsulated solar panels and solid-state electronics ensure the A702-5 is extremely durable and vandal-resistant.
- Installs in minutes using three or four bolts (for flexibility, there are two bolt patterns on the mounting flange).
- No external wiring, cable trenching, etc.
- Turns on automatically at dusk and off at dawn.
- Uses LEDs (light emitting diodes) with approximate 100,000 hour lifespan. No bulbs to replace... ever.
- An infrared programmer is available to change intensity level, activate/deactivate the unit and check battery level for current capacity.
- Intelligent electronics ensure the batteries will last up to five years without maintenance or servicing.
- Replacement battery packs are available from Carmanah.
- Manufactured under ISO 9001:2000 Quality Assurance Practices.
- 30-day satisfaction guarantee and one-year warranty.
- Can be mounted to Carmanah A702 base mount and 2.0" frangible coupling.
Accessories
| 50145 | 2" to 1" Frangible Coupling |
|
The 2" to 1" frangible coupling includes a 1" column with additional set screw for secure installation using Carmanah aviation accessories. The 2" to 1" frangible coupling adapts to the 1.5" Carmanah Floor Flange, the 2" Carmanah Floor Flange, the 601 airport mounting plate and conventional 2" threaded NPT stakes. The 2" to 1" frangible coupling is manufactured out of aluminum, providing FAA compliance for high and medium intensity edge light requirements.
The 2" NPT Frangible Coupling will provide a permanent, temporary or expedited mounting system for Carmanah aviation lights.
|
|
|
The 2.0" floor flange is designed for concrete installations using the 2" to 1" frangible coupling for taxiway, runway, threshold, apron, or helipad edge installations. The 2.0" floor flange is excellent for permanent installations where current infrastructure is not in place and edge lights need to be secured and frangible.
|
|
| 37002 | Airport Mounting Stake (1.5" Hub) |
|
Manufactured out of galvanized steel, the all weather airport mounting stake allows for permanent installation in earth and gravel environments at general aviation airports and remote defense airfields. The 30" airport mounting stake is available in 2" and 1.5" coupling configurations. Frangible coupling size must be determined before ordering.
Stake (Angle Iron) Mounting Instructions: Install the stake in a 6" (15 cm) diameter hole at a depth of 30" (76 cm). Do not install stake by driving it into the ground. Backfill around the stake with thoroughly compacted earth passing a 1" (2.54 cm) sieve. Where required due to unstable soil conditions, backfill with concrete. Install the top of the stake even with, or not more than 1/2" (1.3 cm), above the finished grade and maintain within 1 degree of the vertical. In areas where frost may cause heaving, anchor the stake with concrete and use a permeable backfill material such as sand and then cover the top surface with an impervious material to reduce moisture penetration.
|
|
| 38964 | Airport Mounting Stake (2" Hub) |
|
Manufactured out of galvanized steel, the all weather airport mounting stake allows for permanent installation in earth and gravel environments at general aviation airports and remote defense airfields. The 30" airport mounting stake is available in 2" and 1.5" coupling configurations. Frangible coupling size must be determined before ordering.
Stake (Angle Iron) Mounting Instructions: Install the stake in a 6" (15 cm) diameter hole at a depth of 30" (76 cm). Do not install stake by driving it into the ground. Backfill around the stake with thoroughly compacted earth passing a 1" (2.54 cm) sieve. Where required due to unstable soil conditions, backfill with concrete. Install the top of the stake even with, or not more than 1/2" (1.3 cm), above the finished grade and maintain within 1 degree of the vertical. In areas where frost may cause heaving, anchor the stake with concrete and use a permeable backfill material such as sand and then cover the top surface with an impervious material to reduce moisture penetration.
|
|
| 36339 | 700 Series Mounting Plate |
|
The Carmanah airport 700 Series mounting plate is designed for elevated runway, threshold and runway caution edge lighting. The 700 Series mounting plate is designed for stake mounted or floor flange installations on concrete and/or dirt surfaces. Manufactured to fit 1.5" or 2" to 1" frangible couplings, the 700 Series mounting plate is designed to bolt into the bottom of the 700 series aviation light using stainless steel bolts. Powder coated aviation yellow, the 700 Series mounting plate adapts to the 1.5" Carmanah Floor Flange using a 1.5" frangible coupling or the 2" Carmanah Floor Flange using a 2" to 1" frangible coupling. Common size of the airports coupling will determine which floor flange is ordered.
|
|
| 38339 | 700 Series Mounting Bolt Kit |
|
The 700 Series Bolt Kit contains the required hardware to mount 700 series lights to the correct mounting bases. Each package contains the necessary items to properly mount one light. Parts list includes:
Flat washer, ½", SS (8)
Screw, cap, hex, ½"-13, SS (4)
Nut, lock, ½"-13, SS (4)
|
|
| 46397 | Wedge Anchor Bolt Kit |
|
The Carmanah airport wedge anchor bolt is designed for securing the 1.5" or 2" Floor Flange to hardened concrete and dirt surfaces. Four 3/8" X 3 ¾" wedge anchor bolts are used in installations on permanent, temporary and expedited airfields.
Combined with the 1.5" or 2" Floor Flange, these wedge anchor bolts are ideal for permanent installations where current infrastructure is not in place and edge lights need to be secured and frangible.
|
|
|
The A702 IR Shield is used for Defense "box and one" operations providing unidirectional 180 degree infrared or visible output.
The unit can be installed by the end user or during manufacturing offering versatile performance in the rare chance that omnidirectional output may be needed at a later date.
|
|
|
The Carmanah bird deterrent accessory attaches easily to any Model 601 or 700 Series light. The spikes on the deterrent discourage birds from perching on the light.
|
|
|
Specifications
